Resources

Engineering a Stable Battery Housing Challenge During early module testing, a battery manufacturer observed localized housing deformation and edge-seal failures after repeated charge/discharge cycles. Post test inspections revealed subtle swelling and misalignment in the cell stack—but the root...

Pressure Mapping for EV Design Design differences and challenges for the next generation of EVs can be quite different than existing design for internal combustion vehicles. In addition to the core battery stack assembly and design, pressure mapping system analysis is key to many different aspects...

Taking the Bumpy Journey to Market Challenge: Food transportation can be especially difficult in underdeveloped nations, or regions with poor transportation infrastructure. Given their soft form factor, tomatoes are quite sensitive to excessive bumps on the road, which can lead to significant...

Battery formation is a pivotal stage in the manufacture of batteries, determining their performance and longevity. This process involves the initial electrochemical transformation of raw materials, shaping the battery's efficiency and stability. Through controlled charge and discharge cycles, the...

Background Having proper nip roll alignment is crucially important for high-volume printing press machines. Five minutes of run time on misaligned rolls can result in thousands of dollars in damaged product. Depending on the size and location of the nip, taking nip measurements can be difficult...

Background Most electronic assembly processes are performed by high-precision robotic systems. These systems are tasked to properly move and insert delicate components onto a circuit board. As a result, the assembly robots must be checked frequently for changes in alignment that can occur with...

Background The food packaging industry must always maintain high standards for their packaging seals. These standards are to protect the consumer from tampering and/or receiving damaged product. Sealing bars are used to properly seal two parts of a package in a high temperature environment, and...