FAQs

Do I need an Instron device to calibrate my ELF system?

Question: Do I need an Instron device to calibrate my ELF or WELF?

Answer: No! You can use dead weights and that will work fine. The video calibration tutorial uses one, but it's not necessary.

 

Link to this FAQ

I have an RMA Number. What do I do?

After your RMA number has been issued, you should have received an email with instructions, which are printed below.

  1. Mark your RMA number clearly in large text on the outside of the package. We are unable to accept packages which do not clearly show the RMA number on the outside of the box.
  2. Inside the package, please include a letter providing your name, your RMA number, your return shipping address, and a brief description of the problem.
  3. Please package the returned product very carefully to prevent damage during transit. We recommend the original box and packing material. If the original packing is not available, we recommend at least one inch of firm padding all the way around the product. The package should be trackable and insured for an appropriate value.
  4. Ship the package to:

Tekscan, Inc.
333 Providence Highway
Norwood, MA 02062

Attention: RMA # RMAxxxxxx (your issued number)

Note: You are responsible for the cost of shipping the product to Tekscan. We will gladly match your shipping method (e.g., Ground, 2-Day, overnight, etc.) for the return shipment back to you. However, please be aware that any local customs charges will not be paid by Tekscan.

If you have any further questions regarding your RMA, please contact Tekscan Technical Support.

Link to this FAQ

How Do I Obtain an RMA Number?

An RMA number can only be issued by contacting Tekscan Technical Support.

We will help you with the necessary troubleshooting steps. If a product is in need of Tekscan evaluation, the Customer Support team member will issue an RMA number to you.

If you're calling about a unit:

  • Be ready to operate the unit
  • Have the product serial number available
  • Call when the unit is powered and exhibiting the symptom

Link to this FAQ

What is an RMA number?

RMA is an acronym for Return Material Authorization.

A RMA number is assigned to the service order that is created when a customer requests repair, or service of product believed to be defective. RMA numbers are required for all service and repair work performed by Tekscan, Inc. The RMA number will be provided to the customer after successfully providing the information needed to create the service order.

This FAQ entry details the steps to obtaining an RMA number.

Link to this FAQ

Can I purchase only Tekscan sensors?

Question: Can I purchase only Tekscan sensors?

Answer: Tekscan’s patented array or grid sensors are designed to only work with our software and hardware; therefore you cannot simply purchase the sensors unless you own a Tekscan system. We offer single element force sensors that can be purchased without our electronics and software.

Link to this FAQ

How do I clean Tekscan sensors?

Question: How do I clean Tekscan sensors?

Answer: You can wipe our sensors clean with alcohol or water.

Link to this FAQ

Is calibration possible for dynamic loads?

Questions: Is calibration possible for dynamic loads?

Answer: Yes.

Link to this FAQ

Do sensors come calibrated?

Question: Do sensors come calibrated?

Answer: No. Sensors should be calibrated by the user with the material (or a material similar) to the one being used in the application.

Link to this FAQ

Can your sensors be trimmed to a smaller size or shape?

Question: Can your sensors be trimmed to a smaller size or shape?

Answer: Several sensors available are trimmable. Refer to the sensor's detail page to determine whether your sensor is trimmable.

Link to this FAQ

How many tests/runs do sensors last for?

Question: How many tests/runs do sensors last for?

Answer: The life or durability of our sensors depends greatly on the pressures they are subjected to, as well as the test environment itself. Sensors used to measure lower pressure interfaces and between softer surfaces will last longer than those exposed to higher pressure, in more aggressive environments. Therefore, our sensors may last for only a few tests in some environments compared to thousands of tests in others.

Link to this FAQ