An equilibrator for with an active area of 17.5 in. x 19.5 in. (445 mm x 495 mm).
Equilibration devices are recommended for improving accuracy and lifespan of Tekscan systems. During equilibration, the sensor is inserted between a flat backing plate and an air filled bladder, which is inflated in order to apply a uniform pressure to the active area of the sensor. The equilibration process allows the software to compensate for any variation or uneven output across individual sensing elements caused by manufacturing or repeated used of the sensor. Equilibration devices are useful to perform quality assurance checks on the sensor and confirm uniform output by the sensor.
Over time and through repeated loading, individual force sensing elements will eventually start to vary somewhat in sensitivity. The equilibrator applies a uniform pressure across the face of the sensor, allowing the software to easily see and quanitfy these variations. A digital compensation factor is automatically created and applied to each individual sensng element. This normalizes all of the sensing elements on the sheet, improving the accuracy and extending the lifespan of the sensor.
|Sensor in Equilibrator before software equilibration is performed.||Sensor in Equilibrator after software equilibration is performed.|
|Active Area||445 mm x 495 mm (17.5 in. x 19.5 in.)|
|Width||508 mm (20.0 in.)|
|Length||620 mm (24.4 in.)|
|Height||274 mm (10.8 in.) - Including Gauge and Fittings|
|Weight||18.2 kg (40 lbs.)|
|Fram Material||Wood and Aluminum|
|Gauge Accuracy||1.5% F.S.|
|Pressure Range||0-34.5 kPa ( 0-5 psi)|
|Width||254 mm (10.0 in.)|
|Length||254 mm (10.0 in.)|
|Height||191 mm (7.5 in.) - To Tip of Valve Knob|
|Weight||3.2 kg (7 lbs)|
|Air Required||34.5-861 kPa (5-125 psi) (Supplied by Customer, Clean and Dry, Non Volatile or Flammable)|
|Connection||3/8 in. Flex Tube and 1/4 in. Industrial Design Disconnect Plug|
|Features||3-Way Toggle Valve for Vacuum, Adjustable Regulator|
To print this web page, please use our "share" tools.