Connects with VersaTek Cuff for use in close vicinity to living organisms.
The VersaTek™ 2-port hub is compatible with the VersaTek cuff and is certified for use in close vicinity to living organizms. Accessories are available to allow a user to wear the device on a belt. The 2RJ45 ports make the system compatible with two cuffs. BNC connections on the housing allow for Triggering and Synchronization with 3rd party devices.
|2-Port VersaTek™ Hub|
|System Part #||V2PH-1|
|Housing Material||Hub: Polyurethane [PUR] (Grey)|
|Connection Type||USB 2.0|
|Weight||236 g (8.3 oz)|
Input: 100-240V 5A 50-60 Hz
Output: 9V, 3A
|Standard Cable Length||
Handle to Hub: 4.57 m (15 ft)
Hub to Host: 3 m (10 ft)
|Maximum Cable Length||
Handle to Hub: 30 m (100 ft)
Hub to Host: 5 m (16.4 ft)
|Maximum Scanning Speed||Up to 750 Hz (speeds vary by sensor)|
|Handles Supported by Hub||2|
|Digital Pressure Resolution||8 Bit|
|Communication to PC||USB 2.0, 480 Mbps|
|Sensitivity Adjusment||x 7 to 1/3 of Sensor Pressure Range|
|Temperature||-10° to 55°C (14° to 131°F)|
|Relative Humidity||0 to 90 (non condensing)|
|VersaTek Cuff (VC-1), VersaTek 2-port Hub, Power Supply (VPS-4), AC Cord (CAB-SJ120-8), 10-foot USB-A to USB-B Cable, System Carrying Case, Sensor Carrying Case|
To print this web page, please use our "share" tools.