MatScan^® System

barefoot pressure measurement and analysis

Low-profile floor mat that captures barefoot plantar pressures and forces.

MatScan Pressure Mat System Features:

Low-profile floor mat that captures barefoot plantar pressures
Objective and quantified data can be analyzed to support diagnosis and mode of treatment
Provides insight into foot function and biomechanics
Identifies regions of high plantar pressure that cannot be seen with the naked eye
Available with either Evolution^® or VersaTek^® electronics
USB connection
Platform height of only 5mm
Scanning speed of 100 Hz with the #3150 sensor and Evolution electronics or 440 Hz with the #3150E sensor and VersaTek electronics
3 hardware choices available: Tethered, Wireles, and/or Datalogger. See 'System' tab for more details.

Benefits of Pressure Mapping:

Expand your practice through proactive foot screenings
Reduce incidence of ulcers and/or pressure sores
Observe what the neuropathic foot cannot feel
Provide supporting documentation for fee-for-service approach and/or insurance claims
Use as an educational tool to teach rehabilitation exercises for the lower limb

WOULD YOU LIKE TO BE FOUND BY MORE PATIENTS?

We understand that new patients are essential to any practice and that the ever-changing landscape of online marketing can be tough to follow. Watch this FREE 10 minute webinar on how to optimize your web presence via Local Search Marketing.

For multi-step analysis, please visit our Walkway™ System.

A Tekscan system consists of scanning electronics, software and patented thin-film sensors.

MatScan System Components
System Setup	System Description	System Components
MatScan Tethered *Evolution system shown above	Wires connect the sensor and scanning electronics from the floor mat to the computer via USB port. Dynamic events are captured with scan rates of 100 Hz (Evolution) or 440 Hz (VersaTek).	(1) Evolution Handle MatScan Software CD MatScan Sensor #3150 OR (1) VersaTek Cuff (1) VersaTek 2-Port Hub MatScan Software CD MatScan Sensor #3150E
MatScan Wireless	Data is transmitted directly from the floor mat to the computer, allowing for a wide range of applications. The floor mat can be up to 100 meters away and data can be recorded and displayed on the computer in real time. A 100 Hz scan rate is available with wireless connectivity.	(1) VersaTek Cuff (1) VersaTek 2-Port Hub MatScan Software CD MatScan Sensor #3150E (1) Wireless Unit
MatScan Datalogger	Collects and stores sensor data in its internal memory for upload to a computer at a later time. The floor mat can travel over 100 meters from the computer and can be used when a recording needs to be made over an extended period of time. Scan rates of 440 Hz can be achieved.	(1) VersaTek Cuff (1) VersaTek 2-Port Hub MatScan Software CD MatScan Sensor #3150E (1) Datalogger Unit (1) 8 GB Memory Card
MatScan Wireless and Datalogger	Both options offer complete flexibility.	(1) VersaTek Cuff (1) VersaTek 2-Port Hub MatScan Software CD MatScan Sensor #3150E (1) Datalogger Unit (1) 8 GB Memory Card (1) Wireless Unit

VersaTek Cuffs - Every VersaTek based system uses specially designed scanning electronics called Cuffs. The Cuffs connect to the sensor, gather the data from the sensor, and then process and send this data to your computer via USB connection. VersaTek electronics sample at the fastest speeds and are compatible with other VersaTek sensors, giving you the ability to add in-shoe, prosthetic, grip, and seating & positioning capabilities to your Tekscan System.

Additional items may be included with your system purchase.

View computer requirements

MatScan Pressure Sensors:

Resistive technology
Sensing area is 17.16 x 14.52" (435.9 x 368.8 mm)
Assess subjects while walking and standing using 2,288 sensing elements
Pressure range is 125 psi/862 kPa
Floor mat height is 0.225" (0.57 cm)

Sensor Model 3150

Sensing Area Total

Width Height Sensels Sensel Density

17.16 in. 14.52 in. 2,288 9.2 in.²

435.9 mm 368.8 mm 2,288 1.4 cm²
Sensor Model 3150E

Sensing Area Total

Width Height Sensels Sensel Density

17.16 in. 14.52 in. 2,288 9.2 in.²

435.9 mm 368.8 mm 2,288 1.4 cm²

Click to enlarge images and play videos.

Analyze data for asymmetries during stance phase, asymmetries in left/right weight-bearing, pressure distribution, and offset of position for center of force.
Print reports for patient understanding and record keeping.
MatScan® provides dynamic and static Foot Pressure Distribution Measurement for Foot Pressure Screening, Foot Function assessment, and the prevention and management of Pressure-Related Foot problems.

http://www.youtube.com/watch?v=QuaEdhgLdKM
Overview of MatScan® pressure mapping floor mat and software.

http://www.youtube.com/watch?v=0gfgJ8w6OEc&

MatScan Pressure Mat Software Features:

Display 2-D and 3-D real-time and recorded data
Display pressure and force curves over time
Side-by-side comparisons of pre- and post-treatment conditions
Force-time integrals (Impulse)
Frame by frame, single, and multi-stance phase displays
Isolate and analyze specific areas of plantar foot
Import and export client movie files
Display Center of Force and its trajectory

The software is available in several languages including Spanish, French and German. View software languages available.

Software Options

MatScan Pressure Mat Applications

Identify plantar pressure profile discrepancies between left and right feet
Screen for potential ulcerations
Identify asymmetries during stance phase
Perform in-depth analysis of foot function by isolating sections of the foot such as the heel, midfoot, and forefoot
Review dynamic weight transfer and local pressure concentrations
Identify areas of potential ulcerations
Monitor improvements in balance, strength & weight bearing
Animal gait assessment

Numerous articles have been published regarding computerized gait analysis and its applications. Tekscan has compiled a list of these research publications in our Medical Bibliography.