Display real-time and recorded data as 2-D and
3-D images
Play-back force "movies"
View data frame-by-frame
Link digital images to force data
Export data in ASCII format
Display data frame-by-frame, single, and/or
multi-frame
View and compare multiple tests simultaneously
And much, much, more!
Software Display 3-D view of wiper blade sweep test - wiper
measurements taken at multiple angles (above); Comparison of blade force at two different angles (left)
Every Tekscan Industrial system, including Wiper, uses a specially designed sensor interface
electronic called a "handle". The handle connects to the sensor, gathers the data from the sensor,
and then processes and sends this data to your computer. The handle connects to the
PC via a USB cable. Each interface product embodies sophisticated microprocessor based circuitry to control scanning sequence and frequency, adjust sensitivity, and optimize the performance of our sensors.
Spatial Resolution: 4.0 sensels/linear in (1.57 sensels/linear cm) Technology: Resistive Calibration: With application of controlled device Sampling Rate: 10 Hz Pressure Range: 0 - 10 PSI Sensor Thinness: 0.004 in (0.1 mm)
96 Sensing Elements, 24 in x .38 in (609.6 x 9.65 mm)
128 Sensing Elements, 32 in x 0.77 in (812.8 x 19.49 mm)
The Wiper system comes standard with:
Equilibration/Calibration Devices - Pneumatic devices apply a uniform pressure to the active area of a sensor to normalize output of each sensing element. The system electronically compensates for variation in individual sensing elements.
Related Products & Options
Wireless Capability - Enables a wireless connection between your sensor/handle and your
PC allowing for ultimate flexibility in data acquisition.
